|
Can't find what you need? Request a disassembly manuals and we will try to locate it and add it to our database.
» Pinout.net - Disassemble Database » Replacing Lamp the Epson PowerLite S7 79 W7 S7 W7 WEX31 EX51 EX71
If you like this manual recomend it to your friends...
| | |
| |
- Turn off the projector and unplug the power cord.
- Let the projector cool for at least an hour (if it has been on). The lamp is extremely hot immediately after use.
- Loosen the lamp cover screw (you cannot remove it). Then slide the lamp cover off.
- Loosen the two screws holding the lamp in place (you can’t remove them).
- Hold the lamp as shown and pull it straight out.
- Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.) Then tighten its screws.
- Replace the lamp cover, then tighten its screw.
- Reset the lamp timer.
|
| |
If you like this manual recomend it to your friends...
Search for Disassembly manuals
PinoutMaster team 2005 - 2024
Service manuals -
Car Audio Unlock-
Elemetnt Datasheets-
|
